Hi Guys
Do you like my new idea? If you land out you don’t have to fetch.
Do you like my new idea? If you land out you don’t have to fetch.
Just whistle.
Fred Wittstock
18 February 2008
16 February 2008
Out and about with the Springfield Chickens
Be careful out there, Russ's Mazda car with Simon's Audi wheel after loosing two tyres to a nasty little rock at Switchblade - odd fit so very carefully driven home. Sean Oellerman preceding this with similar and Dave thought he knew the drill but drilled a new tyre as well......
The short lived but oh so enjoyed sordjourn to the Crusaders club for some Monday night park flying.....
A total change of pace to some retro control line flying on the second Saturday morning of each month. Dirk, Doug and Dennis, all with planes.
ARF meets control line with the immaculate classic Nobler from Great Plains.
Doug Irvine in full cry with support from Dirk Meyer - Dirk a very keen control line flyer who will be going to the Worlds this year.
Glen Conradt, Russ's boet back from the states and assisting with lines.
Doug Irvine prepares to launch Dennis Bird's pretty old OD, whislt Dennis trots off to grab the handle.
Russ listening attentively to Doug whilst Dirk and Dennis sort Dennis's plane.
Dirk's smooth flying plane from up country - both Doug and Dennis impressed after having a fly on it.
29 January 2008
Making a V tail
I have recently finished building a "Banshee", a 60 inch slope speed foamie from Tuffplanes. I bought it because I liked it's no-nonsense look as opposed to the many semi-scale planes they had on offer. (Tuffplanes seem now to have closed as the enire website is out of stock). The plane is now finished and flies very well. It needed masses of lead in the nose to get the C of G right due to both a short nose and a fibleglass strengthened tail, so she is not made for light winds - however when the wind is strong, as it was on Sunday at Switchblade, she goes zipping around the sky, and I look forward to entering her in a speed comp.
My biggest challenge however was the V tail - I was supprised when the kit arrived that all I got was a balsa plank and rough sketch showing me how to assemble the tail. I was very worried I'd mess it up and decided to make a jig. First I did a computer printout of the 110 degrees I needed, then cut out 2 identical cardboard frames that I had to line up exactly - also ensuring the two sheets were parallel and 90 degrees from the tabletop. Once it was set I put the two cut out surfaces into the jig shamfering the bottom of each and doing an initial light epoxy glue. Once set I did a second epoxy, then put 3 layers of fibreglass (in diminishing lengths) on both sides.
The next big challenge was gluing it to the fus. I got the fus perfectly level, then cut the jig in two and put the halves either side of the tail as a former before epoxying the tail on. Again finishing the tail/fus join with 3 layers of glass.
The final challenge was the control surface connections. Again all I got was a brass pipe and a sketch... My only concern was that I wanted top hinged elevators (the kit suggested there was no need for rudder input or "ruddervaters") using book binding tape and not the central hinge on a curved elevator end they where suggesting . The problem came as the copper pipe (which is curved) would run up the joint. But in the end it worked out. Getting the brass bent at the right angle was quite a mission though. I also had to make my own "Y" pushrod for the elevator control horns which I made with 2 threaded bar onto one with epoxy and wrapped in thin 
metal wire.
metal wire. There was not a whole lot of room to play with and I used brass connectors not the normal plastic ones. I also struggled to get decent play on the elevators - but due to the long tail the small play is fine as it turned out.
This plane is also a great dynamic soarer, and here is a link to a video of it screaming around!: http://www.tuffplanes.com/Banshee_60/Banshee_60_EV1.wmv
28 January 2008
DMAC Electric fly-in 27 Jan 2008
Pictures taken by Warren Butler of Sundays event (sorry no captions) Perhaps Dave or Warren can fill them in...
05 December 2007
Sean Oellermann and Michel Leusch putting modelling to productive use
Sean and Michel have teamed up and put a helluva lot of work in to a little sideline, using the model helicopters for film and photography use. The pics are max 200k and you just must click on and look at as the thumbs do no justice, quite stunning...... The Ushaka and Pearls pics blew me away. Their airreel web site will be up, shortly. Sean did the soaring Nats with his electric and Michel started as a Springfield groupie glider guider and now achieves amazing stuff in jets.
04 December 2007
From Simon - KZN Speed!
Next Falcon Slope Race 8 December 2008
Please tell all the other guys
Please note;
SAMAA membership required and proof of same at the field.
No SAMAA - No FLYAA
Contact Bob Skinner to join at bobskinn@global.co.za or call your local model shop and or club, for membership forms.
SAMAA rules apply.
Due to the nature and numbers, the matrix will be done at the field on the day.
Venus to be decided on the day due to weather conditions.
This is STILL an informal and 'test' event, so be flexible.
No flight testing will be done during the 'comp'.
NOTE pilots when not competing will also be flagging and timing in rotation so waaa. Those bitching and complaining will be fetching off the cliff and car guarding!
Results will be recorded as per postals, wins and times over the year and into next year.
The pylon distance will be 100 meters.
Foamies will fly 4 at a time.
60 inch, 2 Meter and Open will fly 2 at a time.
The venues will be, Switchblade, or Derek's Dale. If it is to be held at Derek's Dale, we will meet at Tony Watsons Garage In Mount Edgecome.
Springfield will not be considered as a venue due to the size.
The Events;
Zagi 4 up
60 Inch 2 up
2 meter 2 up
Over 2 meter 2 up.
When, and indeed if, I am in a good mood, we the committee, will decide on the numbers if we shall run a class, i.e. if there are only 2 or 3 planes in entered in a class, we will decide if it is worth running for THAT DAY ONLY.
We may combine them for fun.
The committee does infact consist of old and rather large members (all of which could have played rugby for SA!!) and it would be wise to not interfere or assume you know better, as a clop on the head often offends.
The Race Rules
You will need to sign in yourself on the supplied forms what races you wish to compete in.
You will only be allowed to fly 3 out of 4 races. The CD will make exceptions if there are a lack of numbers.
TX control will be with a peg off system.
The distance between Base A and Base B will be 100 meters.
A race consists of 10 laps. One lap is the distance from Base A to Base B. Total distance is 1 Km.
4 flags of different colors will be at base A and a matching set will be at base B.
4 flag’s will be used for 4 up Zagi racing and 2 flag’s would be used for 2 up racing etc.
A competitor helper/ timer will with the flagman at base B identify his pilot with one color of the flags. The helper will also hold and use a flag during the race and will flag in the same manor as base B, so as to confirm to the flag men at base B that he has completed the turn at base A successfully. \
The helper will also time the flight time as and only when the model goes through base A correctly, regardless of the count down. I.e. the model will only be timed when the model has passed Base A on or after the buzzer has sounded. Cut not allowed and the competitor will be required to circle back to Base A to enter the race start correctly.
Launch shall be by hand, by either the competitor or his helper, from the launching area designated by the CD. The launching area shall be as close as is practicable to Base A.
At the end of the preparation period, the competitors shall be given the instruction that they have 1 minute to race start, may launch their models in this time to gain height
When the instruction to launch is given, a countdown of 1 minute to the start shall be clearly called to the competitors by an official, and or a buzzer. A count down every 15 seconds will be called then the last remaining 15 second’s such as; 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2 and 1 second remaining shall be called.
At the end of the countdown the official shall call START / GO A buzzer will sound at the final second or sound a whistle or any other such device, and the competitors may start the race by passing Base A in the direction of Base B.
All competitors planes must be OUTSIDE the course when the Start is called.
If a model is inside the course when START is called. E.g. because it passed Base A before the start) the CD and or his helper/timer shall clearly call a FALSE START. To notify the competitor that his model must still pass Base A in the correct direction before he will be considered to have started.
All turns with no exception must be done ‘AWAY ‘ from the slope edge.
The area behind an invisible line between base A & B will be regarded as a no fly area. You will be disqualified for this if you infringe this safety rule and asked to land. You may fly other races.
Flags at base B will be dropped and will stay down if the competitor turns inside the course, behind the bases, or any other dangerous flying.
Flags at both bases must be held up at all times and only dropped when the aircraft crossed the base correctly. After dropping the flag it will then be raised slowly.
Flags must never be dropped or waved if the aircraft ‘cuts ‘ the base. This is to show clearly that the model has not reached the turning point.
The competitors waiting the next race shall be given 2 minutes (Prep time) notice of the instruction to launch while a race is underway, but if all competitors agree, this period may be reduced. I.e. as a race is running the next race will be asked to ready themselves.
Pilots and timers will give due consideration to each other in regards to obstructions, flag waving and general blocking of sight to the other pilots and helpers while at Base A.
If you are the next competitor up to race you will be required to be in a ready box but NOT SWITCHED ON.
If, during the race the wind drops and the pilots are forced to land because of lack of lift. The proceedings must stop and re-start again once the CD is satisfied there is sufficient lift.
If when the wind drops, even one model stays flying and can complete the 10 laps then that race will be considered to have run it’s course and the other models that landed will be scored according to last man up.
All models may be checked for suitability to fly for safety reasons.
Please call me on 082 8227955 for the final time and venue.
Remember this is a test and fun event so come relaxed, that means you to Kobus.
Regards
The Zagi Model Rules (for Dion & Ziggy also one point for D. Greer)
Only 1.2 meter Flying Wings allowed in the shape and style of a Zagi.
The maximum weight allowed is 750 grams.
Only foam wings allowed. No built up sections.
Any section thickness may be used.
Spars are allowed, provided they are built into the wing and don’t create any hard points at the LE.
As this is a South African event, no Italian spars, hey Dave Greer ; )
Trailing edges from Correx or Balsa.
Ballast is allowed as long as it is carried internally in a tube or similar device and does not create any hard points near the LE.
Ballest MUST be secured or that model will be disqualified, yes that does mean you Ziggy.
No hard leading edges or skins. Only coverings of Parcel tape, Vinyl’s or Heat shrink film are allowed, or any other such soft coverings.
The CD has the right to check if Dions local goop will be allowed, for a small fee.
Wing tips are allowed as long as they do not increase the projected span and are not made from hard materials. Correx is the preferred material, but soft balsa is acceptable.
Simon NelsonShuttle Wash & Shop Pty. Ltd.Gateway
Please tell all the other guys
Please note;
SAMAA membership required and proof of same at the field.
No SAMAA - No FLYAA
Contact Bob Skinner to join at bobskinn@global.co.za or call your local model shop and or club, for membership forms.
SAMAA rules apply.
Due to the nature and numbers, the matrix will be done at the field on the day.
Venus to be decided on the day due to weather conditions.
This is STILL an informal and 'test' event, so be flexible.
No flight testing will be done during the 'comp'.
NOTE pilots when not competing will also be flagging and timing in rotation so waaa. Those bitching and complaining will be fetching off the cliff and car guarding!
Results will be recorded as per postals, wins and times over the year and into next year.
The pylon distance will be 100 meters.
Foamies will fly 4 at a time.
60 inch, 2 Meter and Open will fly 2 at a time.
The venues will be, Switchblade, or Derek's Dale. If it is to be held at Derek's Dale, we will meet at Tony Watsons Garage In Mount Edgecome.
Springfield will not be considered as a venue due to the size.
The Events;
Zagi 4 up
60 Inch 2 up
2 meter 2 up
Over 2 meter 2 up.
When, and indeed if, I am in a good mood, we the committee, will decide on the numbers if we shall run a class, i.e. if there are only 2 or 3 planes in entered in a class, we will decide if it is worth running for THAT DAY ONLY.
We may combine them for fun.
The committee does infact consist of old and rather large members (all of which could have played rugby for SA!!) and it would be wise to not interfere or assume you know better, as a clop on the head often offends.
The Race Rules
You will need to sign in yourself on the supplied forms what races you wish to compete in.
You will only be allowed to fly 3 out of 4 races. The CD will make exceptions if there are a lack of numbers.
TX control will be with a peg off system.
The distance between Base A and Base B will be 100 meters.
A race consists of 10 laps. One lap is the distance from Base A to Base B. Total distance is 1 Km.
4 flags of different colors will be at base A and a matching set will be at base B.
4 flag’s will be used for 4 up Zagi racing and 2 flag’s would be used for 2 up racing etc.
A competitor helper/ timer will with the flagman at base B identify his pilot with one color of the flags. The helper will also hold and use a flag during the race and will flag in the same manor as base B, so as to confirm to the flag men at base B that he has completed the turn at base A successfully. \
The helper will also time the flight time as and only when the model goes through base A correctly, regardless of the count down. I.e. the model will only be timed when the model has passed Base A on or after the buzzer has sounded. Cut not allowed and the competitor will be required to circle back to Base A to enter the race start correctly.
Launch shall be by hand, by either the competitor or his helper, from the launching area designated by the CD. The launching area shall be as close as is practicable to Base A.
At the end of the preparation period, the competitors shall be given the instruction that they have 1 minute to race start, may launch their models in this time to gain height
When the instruction to launch is given, a countdown of 1 minute to the start shall be clearly called to the competitors by an official, and or a buzzer. A count down every 15 seconds will be called then the last remaining 15 second’s such as; 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2 and 1 second remaining shall be called.
At the end of the countdown the official shall call START / GO A buzzer will sound at the final second or sound a whistle or any other such device, and the competitors may start the race by passing Base A in the direction of Base B.
All competitors planes must be OUTSIDE the course when the Start is called.
If a model is inside the course when START is called. E.g. because it passed Base A before the start) the CD and or his helper/timer shall clearly call a FALSE START. To notify the competitor that his model must still pass Base A in the correct direction before he will be considered to have started.
All turns with no exception must be done ‘AWAY ‘ from the slope edge.
The area behind an invisible line between base A & B will be regarded as a no fly area. You will be disqualified for this if you infringe this safety rule and asked to land. You may fly other races.
Flags at base B will be dropped and will stay down if the competitor turns inside the course, behind the bases, or any other dangerous flying.
Flags at both bases must be held up at all times and only dropped when the aircraft crossed the base correctly. After dropping the flag it will then be raised slowly.
Flags must never be dropped or waved if the aircraft ‘cuts ‘ the base. This is to show clearly that the model has not reached the turning point.
The competitors waiting the next race shall be given 2 minutes (Prep time) notice of the instruction to launch while a race is underway, but if all competitors agree, this period may be reduced. I.e. as a race is running the next race will be asked to ready themselves.
Pilots and timers will give due consideration to each other in regards to obstructions, flag waving and general blocking of sight to the other pilots and helpers while at Base A.
If you are the next competitor up to race you will be required to be in a ready box but NOT SWITCHED ON.
If, during the race the wind drops and the pilots are forced to land because of lack of lift. The proceedings must stop and re-start again once the CD is satisfied there is sufficient lift.
If when the wind drops, even one model stays flying and can complete the 10 laps then that race will be considered to have run it’s course and the other models that landed will be scored according to last man up.
All models may be checked for suitability to fly for safety reasons.
Please call me on 082 8227955 for the final time and venue.
Remember this is a test and fun event so come relaxed, that means you to Kobus.
Regards
The Zagi Model Rules (for Dion & Ziggy also one point for D. Greer)
Only 1.2 meter Flying Wings allowed in the shape and style of a Zagi.
The maximum weight allowed is 750 grams.
Only foam wings allowed. No built up sections.
Any section thickness may be used.
Spars are allowed, provided they are built into the wing and don’t create any hard points at the LE.
As this is a South African event, no Italian spars, hey Dave Greer ; )
Trailing edges from Correx or Balsa.
Ballast is allowed as long as it is carried internally in a tube or similar device and does not create any hard points near the LE.
Ballest MUST be secured or that model will be disqualified, yes that does mean you Ziggy.
No hard leading edges or skins. Only coverings of Parcel tape, Vinyl’s or Heat shrink film are allowed, or any other such soft coverings.
The CD has the right to check if Dions local goop will be allowed, for a small fee.
Wing tips are allowed as long as they do not increase the projected span and are not made from hard materials. Correx is the preferred material, but soft balsa is acceptable.
Simon NelsonShuttle Wash & Shop Pty. Ltd.Gateway
082 8227955 031 5662529
Dangers of walking the Dog
I often use "walking the dog" as an excuse to nip down to the gliding site. However a friend of mine warned me against this as he said he used to do the same, and sent me a pic of what happened........ ;-)
01 November 2007
Slope competitor evasion practice from Bill Williams
Air Force Test This will drive you nuts!! But, have fun anyway! The object of the game is to move the red block around Without getting hit by the blue blocks or touching the black walls.If you can go longer than 18 seconds you are phenomenal. It's been said that the US Air Force uses this for fighter pilots. They are Expected to go for at least 2 minutes.Give it a try but be careful...it is addictive!!
Click on: http://tinyurl.com/56t9u
KZN slope site at Escourt - from Michel Zimmerman
.jpg)
Hi Dave, here the info, map and pics. The site is very easy to access, a stretch of dirt road to be taken with patience. The slope is very wide and easily accessed from the road. There are no trees and the landing area is very wide long and flat. The slope is optimal with North to North-Easterly to North-Westerly winds. There is a possibility to reach the other side of the amphitheatre, when there is a East South-East however you need a 4x4 to get there. In case of out-landing there is a big flat open area at the foot of the slope. A bit of a sweat to get back!
We stayed at the Blue Haze Lodge. Very nice and comfortable. There are of course many B&B in town.
Any more info I will gladly oblige,
Best wishes,
Michel
mail me@: amzimmy@iafrica.com
KZN slope sites
This comes up often so thought it useful to post the response to an enquiry regarding KZN slope sites on MGASA - there are others like Olivier's Hoek Pass but these are the more well known coastal and inland sites:
Registered ones off the SAMAA web site:
http://www.samaa.org.za/asp/club_register_by_province.asp
KwaZulu Natal Springfield Slope - DMAC Springfield, Durban North
Russell Conradt 082-822-7887 twsc@... 30o 59' 04'' 29o 49'
02''
KwaZulu Natal Switchblade, Fudu Ridge Slope - DMAC Pinetown-area
Russell Conradt 082-822-7887 twsc@... 30o 43' 10'' 29o 53'
43''
KwaZulu Natal Winston Park Slope - DMAC Winston Park/Pinetown
Russell Conradt 082-822-7887 twsc@... 30o 48' 08'' 29o 49'
05''
This web site is a useful guide to those not registered but previously well flown by RC slopers sites:
http://www.blusky.co.za/sites.html
Arthurs Seat, Central Berg
Beacon Hill (Ifafa)
Bulwer, Southern Berg
Monte Seel (Valley of a thousand hills)
Ingomankulu (Camperdown)
Cliffdale/Key Ridge was the site for the Kzn slope Nats in the 70's and is regularly flown but efforts have not been successful for tracking the owner for registration protocal permission.
This site has much waffle on the newly revisited Inanda/Verulum sites, with particular focus on "Derek's Dale" which has pleasant access from the North Coast:
http://springfieldchickens.blogspot.com/
Simon is taking steps to register Derek's Dale.
Favourites ranking from most preferred for me would be:
Great:
1. Switchblade NE
2. Bulwer
3. Dereks Dale SW
4. Springfield NE
5. Beacon Hill SW
6. One Gum (no go anymore)
Do not enjoy:
7. Arthurs Seat (like being on the moon)
8. Ingomankulu (poor access and too many paragliders)
9. Monte Seel NE (stunning view but uneasy for retrievals)
Registered ones off the SAMAA web site:
http://www.samaa.org.za/asp/club_register_by_province.asp
KwaZulu Natal Springfield Slope - DMAC Springfield, Durban North
Russell Conradt 082-822-7887 twsc@... 30o 59' 04'' 29o 49'
02''
KwaZulu Natal Switchblade, Fudu Ridge Slope - DMAC Pinetown-area
Russell Conradt 082-822-7887 twsc@... 30o 43' 10'' 29o 53'
43''
KwaZulu Natal Winston Park Slope - DMAC Winston Park/Pinetown
Russell Conradt 082-822-7887 twsc@... 30o 48' 08'' 29o 49'
05''
This web site is a useful guide to those not registered but previously well flown by RC slopers sites:
http://www.blusky.co.za/sites.html
Arthurs Seat, Central Berg
Beacon Hill (Ifafa)
Bulwer, Southern Berg
Monte Seel (Valley of a thousand hills)
Ingomankulu (Camperdown)
Cliffdale/Key Ridge was the site for the Kzn slope Nats in the 70's and is regularly flown but efforts have not been successful for tracking the owner for registration protocal permission.
This site has much waffle on the newly revisited Inanda/Verulum sites, with particular focus on "Derek's Dale" which has pleasant access from the North Coast:
http://springfieldchickens.blogspot.com/
Simon is taking steps to register Derek's Dale.
Favourites ranking from most preferred for me would be:
Great:
1. Switchblade NE
2. Bulwer
3. Dereks Dale SW
4. Springfield NE
5. Beacon Hill SW
6. One Gum (no go anymore)
Do not enjoy:
7. Arthurs Seat (like being on the moon)
8. Ingomankulu (poor access and too many paragliders)
9. Monte Seel NE (stunning view but uneasy for retrievals)
31 October 2007
Planes used at Switchblade speed
Thanks to Eric Arnaud for prompting that the plane names would also be useful:
SWITCHBLADE F3F SPEED - 27 October 2007
OPEN
1 Russel Conradt 1000 Toko
2 Brad Conlon 860 Toko
3 Paul Boswarva 788 Miraj
4 Simon Nelson 670 Cobra
5 Ziggy 341
6 Bill Williams 286 Vanessa
60 INCH
1 William Cranmer 1000 Secco Fling
2 Dennis Bird 211 Bandit
FOAMY
1 Russel Conradt 1000 Fast Freddie
2 Dave Greer 833 Wing Warrior
3 Simon Nelson 611 Zagi pink
4 Ryan Nelson 444 Zagi bashed
4 Ziggy 444 Zagi stars
6 Grant Somers 333 Zagi yellow
SWITCHBLADE F3F SPEED - 27 October 2007
OPEN
1 Russel Conradt 1000 Toko
2 Brad Conlon 860 Toko
3 Paul Boswarva 788 Miraj
4 Simon Nelson 670 Cobra
5 Ziggy 341
6 Bill Williams 286 Vanessa
60 INCH
1 William Cranmer 1000 Secco Fling
2 Dennis Bird 211 Bandit
FOAMY
1 Russel Conradt 1000 Fast Freddie
2 Dave Greer 833 Wing Warrior
3 Simon Nelson 611 Zagi pink
4 Ryan Nelson 444 Zagi bashed
4 Ziggy 444 Zagi stars
6 Grant Somers 333 Zagi yellow
30 October 2007
29 October 2007
Coupla pics ahead of Switchblade results
Top: Scatterlings of Africa "Choice brand condoms" everywhere.....
Middle: Organiser's kit
Bottom: Will with Secco / Fling hybrid
Middle: Organiser's kit
Bottom: Will with Secco / Fling hybrid
26 October 2007
John Lightfoot's Signal Hill team moved the local SA record to 17 hours some change in the mid seventies and the overseas folk with moooch longer daylight hours have now done a 24 hour plus cycle but the '66 log makes for interesting reading, especially regarding the lift cyles during the day, where our lad had to do a spot of serious thermaling to stay in the game.
One doubts if a serious KZN record was ever achieved (one needs a couple of SAMAA registered witnesses) but Russ Conradt's recent 8:00am flights at Derek's Dale, the current weather pattern and the slope's ability to handle SE through West winds makes it useful, as long as one does weather forecasting homework ahead of time.
I by accident achieved 4 hours 20 with my Ridge Runner at the Kloof golf course slope site in the late 70's, before the batts died (it circled down inverted and landed without a scratch ;-) but modern compact battery technology should make an 11 hour KZN record a cinch. One for Simon and the hard core.... ;-)
22 October 2007
A BIG glider
So you think you built a big glider in your garage - think again. This friend of mine in the UK is part of a WW2 military reinactment group; and as they had a bunch of guys with the German Filshirmjager (Paratrooper) outfits he decided to build a whole full scale german glider in his garage just for a photo shoot! Nuts or what.
26 September 2007
Brainstorms over Winston Park
Does anyone know what happened to the designer/vendor of the Brainstorm, Jacques v d Lingen from Steiltes? These models were purchased from him some while ago and there is interest on our slope for more, but I cannot get hold of the seller. Any ideas??
Jart inspiration
I see quite a few of the BERG lads have been bitten by the Jart bug, and in fact, Mike May has already started a build log on their blog documenting his build. By way of inspiration, here are a few pictures of my EPP Jart bought from Leading Edge Gliders some time ago. She has been flying the Winston Park slope for close on 6 months now without incident. Very smooth flyer with an excellent roll rate. Cant wait to see a squadron of Jarts over Tamatieberg.
17 September 2007
Team Winston checks out Derek's Dale - Sunday 16 September 2007
Team Winston's John Coulson and Brand Conlon assembling their Graphite 2M and Toko. Third slopeateer Paul Paul Boswarva getting the low down on the area from Dave.
Team Winston almost ready but Andre Leusch playing safe and not assembling the Sharkie till he sees wot all the fuss is about. 
Wind protection the order of the day - Dave had quickly decided sloping in drizzle was a preferable option to RC Cars in drizzle, fortunately the rain held off at the slope.
Brad fired up to get going......
Rob Pirie showing the latest style on landing approaches for good pics - hard on crunchies, though.....
Paul on landing approach with the slippery Banana 60 inch.
The windblown smile says it all......
Roving photographer Rob shown the old school neck strap approach.
Paul about launch Brad's screamingly fast 490gram ballasted Toko.
West slope view over Inanda dam.
The motley crew, John (Graphite), Andre (Sharkie), Brad (Toko), Dave (JW) and Paul (Banana).
Same crew with Rob the camera man instead of John.
The wind was helter and landings skelter but quite an enjoyble outing for what was looking like a grisly day. Some testing of a possible F3F course was encouraging. Greg West arrived late and treated us to latest in splat landing approaches......
Subscribe to:
Posts (Atom)